Description.
Honeywell 5800 to LoRaWAN Bridge
The Honeywell 5800 to LoRaWAN Bridge translates wireless Honeywell sensor data to LoRaWAN payloads that can be interpreted by the end application. This bridge product uses the proprietary Radio Bridge RBM101-HW5800 module to decode the wireless Honeywell sensor data.
Wireless 4-20mA Current Loop Sensor / Bridge
The 4-20mA sensor uses a 10-bit ADC to measure an analog value between 4 and 20mA with a 10uA resolution. If the measured value rises above or falls below the configured thresholds, an alert is sent over the wireless network.
Wireless Outdoor/Industrial Air Temp and Humidity Sensor
The external-probe air temperature and humidity sensor uses air flow to measure temperature and humidity levels. If the temperature and/or humidity rises above or falls below the configured thresholds, an alert is sent over the wireless network.
LoRaWAN GPS Tracker
The LoRaWAN GPS Tracker reports GPS coordinates through a LoRaWAN network. The frequency of the GPS update period, the GPS acquisition period, and the reporting period can all be controlled through downlink messages to optimize the battery life for specific applications. An internal accelerometer is used to send GPS coordinates when there is a change in movement.
Wireless Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. When an open or close event is detected, an alert is sent to the wireless network.
Maxbotix Ultrasonic to LoRaWAN Bridge
The ultrasonic level sensor provides high accuracy ultrasonic proximity detection and ranging in air.
Wireless Ultrasonic Level Sensor
The ultrasonic level sensor provides high accuracy ultrasonic proximity detection and ranging in air.
Wireless Outdoor/Industrial Dry Contact Sensor / Bridge
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the wireless network.
Wireless Dry Contact Sensor / Bridge
The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the wireless network.
Wireless IP67 Voltage Sensor
The wireless voltage sensor measures voltages between 0-30V with 10mV precision. When the voltage rises above or drops below a threshold, an alert is sent over the wireless network.