Wireless Bridges

Wireless radio bridges that connect third party sensors and devices to a LoRaWAN network.


Wireless 4-20mA Current Loop Sensor / Bridge

The 4-20mA sensor uses a 10-bit ADC to measure an analog value between 4 and 20mA with a 10uA resolution. If the measured value rises above or falls below the configured thresholds, an alert is sent over the wireless network.


Maxbotix Ultrasonic to LoRaWAN Bridge

The ultrasonic level sensor provides high accuracy ultrasonic proximity detection and ranging in air.


Wireless Outdoor/Industrial Dry Contact Sensor / Bridge

The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the wireless network.


Wireless Dry Contact Sensor / Bridge

The two-wire dry contact sensor detects a connection between two wires. When the wires are either shorted (connected) or opened (disconnected), an alert is sent over the wireless network.